How to Replace Sidekick 2008 LCD Assembly

Did your Sidekick 2008 LCD screen get cracked?  Backlight burned out?  I am sorry to hear that, but there are finally LCD Screens becoming available for the sidekick 2008.  This mean you will be able to replace the broken LCD screen and fix your sidekick 2008 yourself.

Click the following link to see if there are any LCD screens for the Sidekick 2008 available:

Sidekick 2008 LCD’s for Sale

This is a guide on how to replace the whole Sidekick 2008 LCD assembly.  It is extremely easy to do. There are only 2 screws that you will need to remove to replace the whole unit.

Tools Needed:

T6 torx driver

Materials Needed:

Replacement LCD Sidekick 2008

Directions:

  1. Power down unit.
  2. Remove back shell  and take out the battery.  removesidekick2008backcover thumb How to Replace Sidekick 2008 LCD Assembly sidekick2008batterycoverremoved thumb How to Replace Sidekick 2008 LCD Assembly
  3. Flip the sidekick screen halfway to access the two screws that need to be removed.  Remove the screws using the T6 torx driver.  rotatesidekick2008lcdscreen thumb How to Replace Sidekick 2008 LCD Assemblyremove2screwssidekick2008lcdscreen thumb How to Replace Sidekick 2008 LCD Assembly

4. While still holding the screen in the half flipped position, gently lift the screen up and out.

tiltscreentotheleft thumb How to Replace Sidekick 2008 LCD Assembly

Warning

Be careful not to touch the copper contacts on the connector shown below. The pins on the connector of the base unit are very fragile.

becarefulofpins thumb How to Replace Sidekick 2008 LCD Assembly

5. Prepare the replacement screen for installation. Make sure the spring unit is aligned as shown. Fail to follow this step can cause the screen not to flip properly. If it is not aligned as shown, rotate spring assembly until it is. backsidekick2008lcd thumb How to Replace Sidekick 2008 LCD Assembly

6. Rotate the LCD screen to the half flipped position and install in base unit. See picture in step 4 for the proper angle to install. Once installed, slowly release the screen and allow to flip into position.

7. Rotate the LCD screen to the half flipped position and install the two screws removed in step 3 and tighten them down.

8. Test the flip action of your phone. It if doesn’t work right, remove screen and go back to step 5.

9. Once the flip action is working, it is time to reinstall the battery and back cover.

10. Power up your Sidekick 2008 and enjoy it with a functional LCD Screen.sidekick2008screenopen thumb How to Replace Sidekick 2008 LCD Assembly

Get a replacement LCD for your Sidekick 2008 here.

Disclaimer: Disassembling your Sidekick  2008 will void the warranty. Proceed with the preceding instructions at you own risk. www.fixmysidekick.com is not liable for any damage that may occur. This website is in no way related to or associated with T-mobile or Danger Inc.

Originally posted 2009-01-25 20:20:32.

Related posts:

  1. Sidekick 2008 LCD Screen Replacement Replace Only the LCD Screen on Sidekick 2008 Did your...
  2. How to Replace the LCD Lens on a Sidekick LX 2009 Is the front screen on your sidekick 2009 cracked? ...
  3. Reset Sidekick 2008 from Sick Sidekick Screen Recover the Sidekick 2008 from the screen with a picture...

Fix My Sidekick




8 Responses to “How to Replace Sidekick 2008 LCD Assembly”

  1. jared says:

    So, has anybody replaced the sidekick 2008 lcd lens? I can’t find instructions anywhere. So lets here it!

  2. kyle says:

    I just replaced my lcd unit with one I bought from one of your links. The screen is on and semi functional. I have no back lighting. I cant hardly see whats on the screen. What can I do to fix this?

  3. sarah n says:

    hey..i wuld like to noe if my screen is crack dat means i need a lcd screen rite…n if i do where can a person get da screw driver to fix it…

  4. cjwarren says:

    id like to know how to dissasemble the rest of my sidekick 2008 so i can replace the back motherboard cover and also where i can find one

  5. deborah smith says:

    i need to replace the glass covering my sidekick lcd how do i do that? my lcd isnt messed up or anything how would i fix it?

  6. Nefty says:

    Hey, um i need help finding a lcd screen not a lens and all you guys have is lens. so if you guys can find one can you email me on my tmail thaniks. nefshizzle@tmail.com

  7. Divany says:

    Hi, I am trying to open the lcd screen to replace it but the #0 phillips screwdriver dosent fit. Is it the #0 phillips screwdriver that you need to open the lcde in the sidekick.? I have the T6 screw to open it. But what screw do I need to open the sceen

    Plz reply at my tmail becuz I don’t usually come here that often
    Email: divany@tmail

  8. Tom says:

    Also a “0 Phillips screwdriver” is needed for the 2nd part of this guide

Leave a Reply


Powered by Yahoo! Answers